T-Pro Biotechnology


for your life science lab

Aqua EZ Clean

 

 

   

The sheet is the underwater of multigerms spread on disc after condensed and incubate in 72 hours at 37C. 

The top is control(only ddH2O in disc)
The bottom of left is 500X
The bottom of right is 200X
 

 

CO2 incubator or water baths are basic equipment required in tissue culture. However these also make fertile breading ground for contaminants due to the high humidity and temperature. As soon as contamination appears it can be difficult to get rid of and severe damage can be caused. It is therefore essential to systematically clean and disinfect the equipment.The disinfection proceed every 14 days or one month each time at least.

 

Characteristics:
  • non-volatile
  • Bacteriostasis or prevention of bacteria's further growth
  • Operation simply and apply to the tray of CO2 incubator or water bath
  • The water should be replaced with sterile water every two to four weeks
  • It identify by color of water, the water should be replaced when the light blue color became crystal or light yellow.
  •  

 

Disinfecting the CO2 Incubator Surfaces (200X)
The water should be replaced with sterile water every 2~4 weeks, adding 5ml of T-Pro Aqua EZ Clean per 1 liters of water.
 
 
Disinfecting Ordinary Water Baths (500X)
It is recommended to use 2ml of T-Pro EZ Clean per 10 liters of Water in the bath, and to repeat the procedure every 2~4 weeks.