Products

Aqua EZ Clean

 

 

   

The sheet is the underwater of multigerms spread on disc after condensed and incubate in 72 hours at 37C. 

The top is control(only ddH2O in disc)
The bottom of left is 500X
The bottom of right is 200X 
 
CO2 incubator or water baths are basic equipment required in tissue culture. However these also make fertile breading ground for contaminants due to the high humidity and temperature. As soon as contamination appears it can be difficult to get rid of and severe damage can be caused. It is therefore essential to systematically clean and disinfect the equipment.The disinfection proceed every 14 days or one month each time at least.
 

T-Pro Aqua EZ Clean

Dedicated Laboratory Water Bath/Incubator Biocides:

This is the safest, most effective, and highly recommended option.

These products are specially formulated and typically contain:

Broad-Spectrum Biocides: Effective at low concentrations against bacteria, fungi, and algae.

Corrosion Inhibitors: To protect metal components.

Low-Foam or Non-Foaming Formulations: To prevent foam issues.

Stability: Maintains activity at elevated temperatures and over extended periods.

Relatively Low Toxicity/Irritancy: (At correct use concentrations) for personnel and the environment.

Always follow the manufacturer's recommended concentration.

Characteristics:

  • non-volatile
  • Bacteriostasis or prevention of bacteria's further growth
  • Operation simply and apply to the tray of CO2 incubator or water bath
  • The water should be replaced with sterile water every two to four weeks

 

Disinfecting the CO2 Incubator Surfaces (200X)

The water should be replaced with sterile water every 2~4 weeks, adding 5ml of T-Pro Aqua EZ Clean per 1 liters of water.
 
Disinfecting Ordinary Water Baths (500X)
 
It is recommended to use 2ml of T-Pro EZ Clean per 1 liters of Water in the bath, and to repeat the procedure every 2~4 weeks.